Purpose of the Filter.bin and WFB.bin files

divider

News:

Effective 7/4/2019, Spectrum Software is closed. Micro-Cap is now free.

Technical support will be available for at least 90 days via email at Support.

You can download the latest versions of Micro-Cap here: Download
You can choose either the executable program or the entire installation CD for MC10, MC11, and MC12. If you have an earlier version, download and use MC12. These new versions do not require the security key, so they make Micro-Cap free to the entire engineering community.

Thank you for the honor and privilege of serving you for the last 39 years.

Spectrum Software

divider

Miscellaneous

In the main Micro-Cap folder, there are two files called FILTER.BIN and WFB.BIN. What are these files for?

The FILTER.BIN file stores all of the information needed for the Active and Passive Filter designers which can be found under the Design menu in Micro-Cap. This file contains all of the circuit configurations that can be used within these designers. If this file is not present, the designers will not work.

The WFB.BIN file stores all of the waveform information that the user has stored within the Waveform Buffer. If this file is not present, Micro-Cap will recreate it the next time the program runs.

	Categories
	AC Analysis Analysis - General DC Analysis Dynamic DC Incompatibilities Initial Conditions Miscellaneous Models Monte Carlo Output Probe Schematic Editor Stepping Transient Analysis