If Report Display is enabled (box checked), the input and output strings of the remote-control interface are displayed on the Remote screen. The remote display consists of three columns:
|
<Input/output> |
Colored symbols for input (–>) to the R&S® CMU, output (<–) or error messages (E). |
|
Fct. Grp. |
Name of the addressed function group; see description of command SYSTem:REMote:ADDRess:SECondary in Chapter 6. |
| Command | Input command string, response/output string of the R&S® CMU or error message. |
This parameter is also available as a hotkey in the remote screen.
Remote control
TRACe:REMote:MODE:DISPlay ON | OFF