Switches the remote debug mode on or off. A debug icon indicates that the debug mode is on.
In remote debug mode, the MMI can be used to visualize, monitor, or check the results of measurements controlled via the remote interface. To make this possible, the behavior of the instrument with respect to measurement and generator control, measurement statistics, and signalling is changed; see section Remote Debug Mode.
When the remote debug mode is enabled or disabled, the current measurement is reset and the instrument settings are adjusted according to the table in section Remote Debug Mode. The remote debug mode has no impact on the measurement performance of the instrument. It is not changed after a reset but disabled when the R&S CMU is re-started.
Remote control
SYSTem:GTRMode:RDMode ON | OFF