The measurement curve is displayed as a continuous trace in the test diagram together with the limit lines, markers and the D-line, if defined.
The measurement curve in the Power measurement menu shows the measured power of the received RF signal (in dBm) as a function of time (in μs). The diagram scale, which is equal to the measurement range, and the displayed result depend on the test settings. The display mode for the measurement curve (Minimum, Maximum, Average, Current) is indicated in the upper right corner of the diagram.
Remote control
READ:ARRay:POWer[:RESult]...?
FETCh:ARRay:POWer[:RESult]...?
SAMPle:ARRay:POWer[:RESult]...?