CONFigure:MULTitone:AF1Channel:LIMit:LINE:ASYMmetric:LOWer
CONFigure:MULTitone:AF2Channel:LIMit:LINE:ASYMmetric:LOWer
<Limit_1>, <Enable_1>, ... <Limit_20>, <Enable_20>
|
<Limit_nr> |
Description of parameters |
Def. value |
Def. unit |
|
-80 dB to +80 dB, |
Lower limit line at tone <nr> |
See below |
dB |
|
<Enable_nr> |
Description of parameters |
Def. value |
Def. unit |
|
ON | OFF |
Enable lower limit line at tone <nr> |
ON |
- |
|
Description of command |
FW vers. |
|
This command configures the lower limit lines and enables the limit check at the 20 test tones that can be defined via |
V 3.0 |
| By default, the limit check is switched on at all tones and the following limit lines apply: | |||||
| Tone <nr> | Limit Line/[dB] | Enable | Tone <nr> | Limit Line/[dB] | Enable |
| 1 | -13.5 | ON | 11 | +1.6 | ON |
| 2 | -10.2 | ON | 12 | +2.3 | ON |
| 3 | -7.8 | ON | 13 | +2.9 | ON |
| 4 | -5.9 | ON | 14 | +3.5 | ON |
| 5 | -4.3 | ON | 15 | +4.0 | ON |
| 6 | -3.0 | ON | 16 | +4.6 | ON |
| 7 | -1.9 | ON | 17 | +5.0 | ON |
| 8 | -0.9 | ON | 18 | +5.0 | ON |
| 9 | 0.0 | ON | 19 | +5.0 | ON |
| 10 | +0.8 | ON | 20 | +5.0 | ON |