Lower Limit, Single Point

Lower Limit, Single Point

CONFigure:MULTitone:AF1Channel:TONE<nr>:LIMit:LINE:ASYMmetric:LOWer

CONFigure:MULTitone:AF2Channel:TONE<nr>:LIMit:LINE:ASYMmetric:LOWer

<Limit>, <Enable>

*<Limit>*	Description of parameters	Def. value	Def. unit
-80 dB to +80 dB,	Lower limit line at tone <nr>	See below	dB
*<Enable>*	Description of parameters	Def. value	Def. unit
ON \| OFF	Enable lower limit line at tone <nr>	ON	-

Description of command	FW vers.
This command configures the lower limit and enables the limit check at one of 20 test tones that can be defined via `CONFigure:MULTitone:AF1Channel:TONE<nr>`. The test tones are numbered by <nr> = 1 to 20. The default limits at all test points are quoted in the previous command.	V 3.0