with floppy / PCMCIA card or
The VersionManager is a tool designed to activate, delete, install, combine, or list different software versions in a convenient way. Moreover, it provides information on the hardware and software configuration of the instrument (Edit service tables, Scan disk), resets the startup settings stored in the non volatile ram, copies information to an external storage medium (Write log files to disk, List all versions to disk), and loads and activates user correction tables (see section RF User Correction).
The VersionManager is part of each CMU firmware version. It is opened automatically after the boot-up process if the CMU detects a storage medium in its floppy disk drive/PCMCIA slot that contains an installation version of the CMU firmware. Alternatively, it can be called up by pressing the Menu Select key after the boot-up sequence is terminated (from the moment when the CMU display turns black until the end of the 3-beep acoustic signal).
|
with floppy / PCMCIA card or
|
|
VersionManager main screen (example)
The different functions of the VersionManager are activated by pressing the corresponding softkeys. Some of them (labeled optional below) are available in a particular configuration of the hard disk only. The upper two softkeys in both softkey bars are not assigned.
Activate other
software (optional)
Firmware
update after board change