Measurement
Menu (Spectrum) - Test settings
The graphical measurement menu Spectrum displays the results
of the spectrum analysis (measurement of signal power as a function of
the frequency).
- The main softkey Spectrum controls the measurement,
indicates its status (RUN | HLT | OFF) and opens the configuration
menu Spectrum Configuration (press twice). The hotkey associated
with the main softkey defines the scope of the Spectrum measurement.
- The other softkeys to the right of the test diagram
are combined with various hotkeys. If a softkey is selected and an associated
hotkey pressed, a popup window will appear which indicates the current
setting and enables an entry (see section Measurement
Configurations (Power Configuration)).
The measurement menu Spectrum is opened from the main menu Menu
Select (with the associated key at the front of the instrument) or
using the Spectrum hotkey.
The basic settings for the Spectrum measurement are directly
accessible from the measurement menu via softkey/hotkey combinations.
Some of the basic settings are also accessible from the Spectrum
Configuration popup menu. They are explained in more detail in section
Measurement
Configurations (Spectrum Configuration).
More:
Spectrum
Measurement
configuration
Analyzer Level
Analyzer Settings
Generator Tx Aux
Tx
Marker Display
Display Marker
Menus