Measurement
Menu (Power) - Test settings
The graphical measurement menu Power displays the results of
the power measurement in the time domain.
- The main softkey Power controls the measurement,
indicates its status (RUN | HLT | OFF) and opens the configuration
menu Power Configuration. The hotkey associated with the main softkey
define the scope of the Power measurement.
- The other softkeys to the right of the test diagram
are combined with various hotkeys (e.g. the hotkeys Frequency and
RBW belong to the softkey Analyzer Settings). The softkey/hotkey
combinations provide test settings and display configurations.
The measurement menu Power is opened from the main menu Menu
Select (with the associated key at the front of the instrument) or
using the Power hotkey.
The basic settings for the Power measurement are directly accessible
from the measurement menu via softkey/hotkey combinations.
Some of the basic settings are also accessible from the Power Configuration
popup menu. They are explained in more detail in the Measurement
Configurations (Power Configuration) section.
More:
Power vs Time
Analyzer Level
Analyzer Settings
Generator Tx Aux
Tx
Marker Display
Display Marker
Menus