Input using the rotary knob - Overwrite mode

• In the start mode, turn the rotary knob to activate the overwrite mode and vary the last digit of the current number.

• Use the left or right arrow key to switch between the decimal places of the indicated number.

• Increment/decrement the active digit by turning the rotary knob.

  The individual digits can be varied without restriction. Incrementing a "9" produces 0 and causes the next higher digit to be incremented by 1. The editor behaves analogously when a "0" is decremented.

An Enter symbol at the bottom right of the input field indicates that the current value has yet to be written to the CMU software.

• Confirm the entry and terminate the input using the ENTER key or by pressing the rotary knob or another softkey or ...

• Press ESCAPE to discard the entry.