Bandwidth (DC Coup.)

CONFigure:AFANalyzer[:PRIMary]:FILTer:BPASs:DCCoupling <Band pass>

CONFigure:AFANalyzer:SECondary:FILTer:BPASs:DCCoupling <Band pass>

*<Band pass>*	Description of parameters	Def. value	Def. unit
BP02 \| BP03 \| BP05 \| BP06 \| BP07 \| BP09 \| BP10 \| BP11 \| BP13 \| BP14 \| BP15 \| BP17 \| BP18	CMU band pass filter with a bandwidth of 6 Hz to 250 Hz 50 Hz to 250 Hz 6 Hz to 3000 Hz 50 Hz to 3000 Hz 300 Hz to 3000 Hz 6 Hz to 4000 Hz 50 Hz to 4000 Hz 300 Hz to 4000 Hz 6 Hz to 15000 Hz 50 Hz to 15000 Hz 300 Hz to 15000 Hz 6 Hz to 21000 Hz 50 Hz to 21000 Hz	BP17	-

Description of command	FW vers.
This command selects the first band pass in the AF analyzer to be used if the AF path coupling is set to DC (see `CONFigure:AFANalyzer...:COUPling` command).	V 3.05

Note:
In firmware versions ³V2.12 but <V3.05, the CONFigure:AFANalyzer... :FILTer:BPASs commands replace the CONFigure:AFANalyzer... :FILTer:BPASs:ACCoupling and CONFigure:AFANalyzer...:FILTer: BPASs:DCCoupling commands. No distinction is made between AC and DC path coupling. In firmware V3.00, no band pass selection is possible if DC path coupling is set. The CMU always uses a default band pass with a bandwidth of 6 Hz to 21000 Hz (BP17).