Bandwidth (AC Coup.)

CONFigure:AFANalyzer[:PRIMary]:FILTer:BPASs:ACCoupling <Band pass>

CONFigure:AFANalyzer:SECondary:FILTer:BPASs:ACCoupling <Band pass>

*<Band pass>*	Description of parameters	Def. value	Def. unit
BP01 \| BP02 \| BP03 \| BP04 \| BP05 \| BP06 \| BP07 \| BP08 \| BP09 \| BP10 \| BP11 \| BP12 \| BP13 \| BP14 \| BP15 \| BP16 \| BP17 \| BP18	CMU band pass filter with a bandwidth of 0 Hz to 250 Hz 6 Hz to 250 Hz 50 Hz to 250 Hz 0 Hz to 3000 Hz 6 Hz to 3000 Hz 50 Hz to 3000 Hz 300 Hz to 3000 Hz 0 Hz to 4000 Hz 6 Hz to 4000 Hz 50 Hz to 4000 Hz 300 Hz to 4000 Hz 0 Hz to 15000 Hz 6 Hz to 15000 Hz 50 Hz to 15000 Hz 300 Hz to 15000 Hz 0 Hz to 21000 Hz 6 Hz to 21000 Hz 50 Hz to 21000 Hz	BP16	-

Description of command	FW vers.
This command selects the first band pass in the AF analyzer to be used if the AF path coupling is set to AC (see `CONFigure:AFANalyzer...:COUPling` command).	³V 2.12

Note:
In firmware versions ³V2.12 but <V3.05, the CONFigure:AFANalyzer... :FILTer:BPASs commands replace the CONFigure:AFANalyzer... :FILTer:BPASs:ACCoupling and CONFigure:AFANalyzer...:FILTer: BPASs:DCCoupling commands. No distinction is made between AC and DC path coupling.