The SCPI Connection section determines the remote-control interface of the CMU.
The following interface settings are available:
|
GPIB + COM1 |
Auto-detection of the interface, the instruments accepts commands from either the GPIB or COM 1 interface |
|
GPIB |
IEEE-bus interface according to IEEE 488, |
| COM 1 | Serial (RS-232-C) interface COM 1, |
| COM 2 | Serial (RS-232-C) interface COM 2. |
For the characteristics of the interfaces see chapter 1 of the operating manual and section Maintenance and Interfaces - Hardware Interfaces.