The Destination select field permits to specify the output destination for the data:
| Printer | Output to external printer connected via the parallel or one of the serial interfaces. The printer is configured in the Setup -Print tab. |
| Internal | Storing in the current printer format to directory Internal\userdata\print\<Dir> where <Dir> is the target directory specified in the Filename Default input field of the Setup - Print tab. If <Dir> is not explicitly defined, the files are written to Internal\userdata\print. |
| Internal WMF | Storing in *.wmf format. |
| External | Storing in the current printer format to the <Dir> target directory (see Internal above) on the PCMCIA card (slot 0, right-hand slot) or floppy disk (with option CMU-U61). A message box Please insert disc ! Repeat ? Yes/No pops up if no storage medium is inserted in the drive. To print, insert the appropriate medium and confirm with Yes. |
| External WMF | Storing in *.wmf format to the PCMCIA card or floppy disk; see above. |
Note:
To make processing of the generated data files easier, we recommend to
use the External output destination.