Confirming/discarding the input

The behavior of the editors depends on whether the values were entered in the insert or in the overwrite mode:

• If only the overwrite mode was used to define the input value no confirmation is necessary. The input value is valid as soon as another softkey or hotkey is pressed.

• If the insert mode is used, or if it was used before swapping over to the overwrite mode, the input must be confirmed with the ENTER key or by pressing the rotary knob. By pressing ESCAPE or another softkey, the input will be discarded and the previous value restored.

If the number entered conflicts with the resolution of the CMU, it will be rounded to the maximum number of digits allowed.