Description of command

FW vers.

This command sets the transition filters (PTRansition and NTRansition filters) and the ENABle registers of the STATus:OPERation and the STATus:QUEStionable registers to defined values:

• PTRansition is set to 32767 (0x7FFF), i.e. all hardware events are detected and transferred to the EVENt register.
• NTRansition is set to 0, i.e. a hardware event that disappears does not cause any change in the EVENt register.

The ENABle registers are also set to 0 so that events are not reported in the status byte.

³V 1.20