The subsystem AFLevel configures the input path for both
channels of the single tone and the Multitone audio measurement.
In manual control the single tone measurement uses the [:PRIMary]
settings. In the Multitone measurement the AFLevel
subsystem corresponds to the Analyzer Level softkey with the hotkeys
Mode and AF Max. Level. Note that the AFLevel[:PRIMary]
and AFLevel:SECondary settings are valid for both single
tone and multitone measurements (see table below).
|
Audio Channel |
Manual Control, Menu |
Remote control keyword |
|
| Single tone, channel 1 | Analyzer/Generator |
|
[:PRIMary] |
| Single tone, channel 2 | - |
|
:SECondary |
| Multitone, channel 1 | Multitone, AF Chan. One |
|
[:PRIMary] |
| Multitone, channel 2 | Multitone, AF Chan. Two |
|
:SECondary |