The MMEMory system provides mass storage capabilities for
the CMU. The functionality of this system is included in the Data
menu; see CMU200/300 operating manual.
The mass storage of the CMU may be internal or external. The internal
mass storage device is a section on the internal hard disk that is reserved
for mass storage (directory c:\temp). The external mass storage device
is either a floppy disk or a PCMCIA memory card, depending on the instrument
configuration. The <msus> (mass storage unit specifier) parameter
in the MMEMory commands denotes the root directory of the
INTernal or EXTernal mass storage device.
The <FileName> parameter is a string. The contents of the string
may contain characters for specifying subdirectories, e.g. "\TEMP\TRASH\test.txt"
for the file named test.txt in the TEMP\TRASH subdirectory
of the root directory or "TEMP\TRASH\test.txt" for the file
named test.txt in the TEMP\TRASH subdirectory of the current
directory, to be queried with the base system command MMEMory:DIRectory
[:CURRent]?. The file name itself may contain the period as a separator
for extensions.
|
MMEMory:SAVE:CURRent <FileName>
[,<msus>] |
||||
| Parameters | Parameter description | Def. value | Def. unit | FW vers. |
| "<FileName>", INTernal | EXTernal |
Name of the config. file to be created Storage device of the config. file |
– INTernal |
– – |
V 3.10 |
| Command description | ||||
| This command saves the configuration of the current function group and test mode to a configuration file. A "?" in the specified file name will be replaced by current numbers that are automatically incremented, starting with zero. The auto-increment function overwrites an existing file with a "9" in its file name. For instrument settings that may be different in manual and remote control (e.g. the repetition mode for many measurements) the manual setting is saved. The command is available in all function groups. This command is CMU-specific. |
|
MMEMory:RECall:CURRent <FileName>
[,<msus>] |
||||
| Parameters | Parameter description | Def. value | Def. unit | FW vers. |
| "<FileName>", INTernal | EXTernal |
Name of the config. file to be recalled Storage device of the config. file |
– INTernal |
– – |
V 3.10 |
| Command description | ||||
| This command recalls the configuration of the current function group and test mode from a configuration file. The command is available in all function groups. This command is CMU-specific. | ||||