Four 50 W BNC connectors for option CMU-B17, I/Q and IF Interface (for CMU200 only):
IF3 RX CH1 IN RX path, IF IN
IF3 RX CH1 OUT RX path, IF OUT
IF3 TX CH1 IN TX path, IF IN
IF3 TX CH1 OUT TX path, IF OUT
|
|
Four 50 W BNC connectors for option CMU-B17, I/Q and IF Interface (for CMU200 only): IF3 RX CH1 IN RX path, IF IN IF3 RX CH1 OUT RX path, IF OUT IF3 TX CH1 IN TX path, IF IN IF3 TX CH1 OUT TX path, IF OUT
|
|
|
15-contact SUB-D connector for input and output of I/Q signals (option CMU-B17, I/Q and IF Interface, for CMU200 only)ta |
Note: The CMU is delivered with different rear panel designs, however, the names of the connectors are unambiguous and used irrespective of the design.
